Sidebar
Volume 43, 2015.
No 4
- V. Modrak, P. Krus, S. Bednar, Approaches to product variety management assuming configuration conflict problem
- Dorota Stadnicka, Dario Antonelli, Application of Value Stream Mapping and Possibilities of Manufacturing Processes Simulations in Automotive Industry
- José Dinis-Carvalho, Luís F. Ferrete, Rui M. Sousa, Hyggor S. Medeiros, António J. Magalhães, João P. Ferreira, Process Mapping Improvement: Extending Value Stream Maps with Waste Identification Diagrams
- S. Sousa, E. Nunes, I. Lopes, Measuring and Managing Operational Risk in Industrial Processes
- Mónica F. J. R. Monteiro, Claudia C. L. Pacheco, José Dinis-Carvalho, Francisco C. Paiva, Implementing Lean Office: A successful case in public sector
- Telmo Pinto, Cláudio Alves, José Valério de Carvalho, Ana Moura, An insertion heuristic for the capacitated vehicle routing problem with loading constraints and mixed linehauls and backhauls
- Hadi Abdollahzadeh, Leonilde Varela, Karim Atashgar, Goran D. Putnik, Condition based maintenance optimization for multi-state wind power generation systems under periodic inspection
- Joaquim Moreira, Manuel Pereira Lopes, Paulo Ávila, Shopping Centres Maintenance Management Performance: A Case Study
- António Vieira, Luís S. Dias, Guilherme A. B. Pereira, José A. Oliveira, M. Sameiro Carvalho, Paulo Martins, Using Simio to Automatically Create 3D Warehouses and Compare Different Storage Strategies: A Comparison of Shapes
- Anabela C. Alves, Rui M. Sousa, José Dinis-Carvalho, Francisco Moreira, Production Systems Redesign in a Lean Context: A Matter of Sustainability
- António Arrais-Castro, Maria Leonilde R. Varela, Rita A. Ribeiro, Goran D. Putnik, Spatial-temporal business partnership selection in uncertain environments
- Sérgio Vicente, Anabela C. Alves, M. Sameiro Carvalho, Nélson Costa, Business sustainability through employees involvement: a case study
- Paulo Garrido, Coordination of Systems through Numeraires
No 3
- Kenneth Holmberg, Ali Erdemir, Global Impact of Friction on Energy Consumption, Economy and Environment
- Barış İshak Sipcikoğlu, Burcu Yiğit, Hüseyin Oflaz, Zeynep Parlar, The Investigation of Friction and Wear Characteristic of Cast Iron against Manganese Phosphate Coated and Austempered Compressor Crankshaft
- Anastasios Zavos, Pantelis G. Nikolakopoulos, Tribological Characterization of Smooth and Artificially Textured Coated Surfaces Using Block-on-Ring Tests
- Razvan George Ripeanu, Vasile Ispas, Dorina Ispas, Review above Applying Active Anode Protection at Some Dynamic Petroleum Equipment's in Order to Reduce Wear
- Jaime Vite-Torres, Manuel Vite-Torres, Rita Aguilar-Osorio, Jesus Eliseo Reyes-Astivia, Tribological and Corrosion Properties of Nickel Coatings on Carbon Steel
- Alexander Minewitsch, Aleksandar Marinkovic, Up-To-Date Tribology Equipment for Standard Qualification of Greases
- Igor Mukchortov, Elena Zadorozhnaya, Igor Levanov, Kseniya Pochkaylo, The Influence of Poly-Molecular Adsorption on the Rheological Behaviour of Lubricating Oil in a Thin Layer
- Pero Dugić, Marica Dugić, Specifications' Influence on Composition and Tribological Characteristics of Industrial Gears Lubricants
- Tilo Reichardt, Delphine Reche, Miriam Sartor, High Temperature Test Device for Targeted Lubricant, Coating and Work Roll Material Evaluation Applied in Hot Rolling – Tribotherm
- Szabolcs Szávai, Sándor Kovács, EHD Contact Modelling of Gleason Bevel Gears
- Oday I. Abdullah, Josef Schlattmann, Michael Lytkin, Effect of Surface Roughness on the Thermoelastic Behaviour of Friction Clutches
- Yurii Goritskiy, Yuliya Ismailova, Konstantin Gavrilov, Yurii Rozhdestvenskii, Aleksei Doikin, A Numerical Model for Mechanical Interaction of Rough Surfaces of the “Piston-Cylinder Liner” Tribosystem
- Victor M. Musalimov, Pavel P. Kovalenko, Svetlana Yu. Perepelkina, Estimation of Triboresistance of Erythrocytes during Surface Scanning with the Use of Atomic Force Microscopy
- Nikolaos M. Vaxevanidis, Aleksandar Vencl, Pandora Psyllaki, Research on Tribology in Southeastern Europe: A Bibliometric Study
No 2
- Zlatomir Živanović, Snežana Petković, Slobodan Mišanović, Apolonia Holo, Željko Šakota, Natural Gas Buses in Serbia Public Transport - Some Operational Experiences
- Velimir Petrović, Zlata Bracanović, Branka Grozdanić, Stojan Petrović, Sergei Sazhin, Dragan Knežević, The Design of a Full Flow Dilution Tunnel with a Critical Flow Venturi for the Measurement of Diesel Engine Particulate Emission
- Olivera P. Kostić, Zoran A. Stefanović, Ivan A. Kostić, CFD Modeling of Supersonic Airflow Generated by 2D Nozzle With and Without an Obstacle at the Exit Section
- Dragoljub Lazarević, Predrag Janković, Miloš Madić, Anđela Lazarević, Robust Conditions for Cutting Force Minimization in Polyamide Turning Process
- Martin Fuchs, Christoph Habersohn, Yakup Kalkan, Christoph Lechner, Friedrich Bleicher, Metrological Investigation of an Actuator Device for Vibration Assisted Turning
- Najdan Vuković, Marko Mitić, Zoran Miljković, Variational Inference for Robust Sequential Learning of Multilayered Perceptron Neural Network
- Isak Karabegović, Bekir Novkinić, Ermin Husak, Experimental Identification of Tool Holder Acceleration in the Process of Longitudinal Turning
- Saša Živanović, Radovan Puzović, Off-line Programming and Simulation for 2-axis Wire EDM
- Gian C. Rana, Ramesh Chand, Dhananjay Yadav, The Onset of Electrohydrodynamic Instability of An Elastico-Viscous Walters’ (Model B') Dielectric Fluid Layer
- Ivan Milanković, Nikola Mijailović, Aleksandar Peulić, Dalibor Nikolić, Igor Končar, Themis Exarchos, Oberdan Parodi, Nenad D. Filipović, Software and Hardware Systems for Abdominal Aortic Aneurysm Mechanical Properties Investigation
- Zoran M. Raspopović, Vladimir D. Stojanović, Uroš Cvelbar, Željka D. Nikitović, Jasmina V. Jovanović, Role of Pressure in Transport of F- Ions in BF 3 Gas For Technological Applications
No 1
- Nikola N. Gavrilović, Boško P. Rašuo, George S. Dulikravich, Vladimir B. Parezanović, Commercial Aircraft Performance Improvement Using Winglets
- Goran M. Mladenovic, Ljubodrag M. Tanovic, Kornel F. Ehmann, Tool Path Generation for Milling of Free Form Surfaces With Feedrate Scheduling
- Nevena D. Stevanovic, Vladan D. Djordjevic, An Exact Analytical Solution for the Second Order Slip-Corrected Reynolds Lubrication Equation
- Đorđe Vuković, Dijana Damljanović, On the Use of Load-Transformation Matrices When Working with Internal Wind Tunnel Balances
- Vladan Kuzmanovic, Ljubodrag Savic, Nikola Mladenovic, Thermal-Stress Behaviour of RCC Gravity Dams
- Nikola Jaćimović, Mirjana Stamenić, Petar Kolendić, Dimitrije Đorđević, Branka Radanov, Ljubiša Vladić, A Novel Method for the Inclusion of Pipe Roughness in the Hazen-Williams Equation
- Miloš M. Živanović, Mihailo P. Lazarević, Conditions for Dynamic Balance of a Rigid Body With Heavy Foot
- Ramesh Chand, G. C. Rana, S. K. Kango, Effect of Variable Gravity on Thermal Instability of Rotating Nanofluid in Porous Medium
- Jovana Jovanova, Viktor Gavriloski, Marjan Djidrov, Goce Tasevski, Model Based Vibration Control of Smart Flexible Structure Using Piezoelectric Transducers
- Marinko Ugrčić, Stevan M. Maksimović, Dragi P. Stamenković, Katarina S. Maksimović, Khettou Nabil, Finite Element Modeling of Wing Bird Strike
- Aleksandar Zunjic, Goran Papic, Bozica Bojovic, Lidija Matija, Goran Slavkovic, Petar Lukic, The Role of Ergonomics in the Improvement of Quality of Education
Универзитет у Београду, Машински факултет
Краљице Марије 16, 11120 Београд 35
тел. (+381 11) 3302-200, факс 3370364
mf@mas.bg.ac.rs
