Paulina Działak
Assistant Professor
Wroclaw University of Science and Technology, Faculty of Mechanical Engineering

Jacek Karliński
Associate Professor
Wroclaw University of Science and Technology, Faculty of Mechanical Engineering

Eugeniusz Rusiński
Full Professor
Wroclaw University of Science and Technology, Faculty of Mechanical Engineering

Crashworthiness of protection structures for mining machine operators: Numerical analysis and experimental validation using Optical 3D Coordinate Measuring Devices



The aim of the work was to perform comparative tests based on strength analysis and experimental research of the structure protecting the operator of the self-propelled drilling vehicle. The first stage was to develop a numerical model. Basing on the documentation, geometric and then dicrete model were developed. As a result of the numerical calculations, courses of displacements, strains and stresses in individual elements of the load-bearing structure were obtained. Then, in order to verify the numerical calculations, experimental tests of the analysed cabin were performed. The experiment was recorded using the VISIONresearch high-speed monochrome digital camera Phantom V12 to determine the dynamic vertical deflection of the cab roof. The protective structure was also measured before and after the test by means of the TRITOP device to mesure permanent deflection of the structure.

Host city and venue

Vienna (Wien) is the federal capital and largest city of Austria, and one of the nine states of Austria. Vienna is Austria's primate city, with a population of about 1.9 million (2.6 million within the metropolitan area, nearly one third of Austria's population), and its cultural, economic, and political centre. It is the 7th-largest city by population within city limits in the European Union.  Read more...

Latest news

More information about final program and schedule during MHCL 2019 conference can be found ...
More in2019  

Agenda

MHCL 2019 conference Day 1


Wednesday - September 18th, 2019

  • 13.00 – 14.00 Registration of participants and welcome reception
    in front of lecture hall GM 2 Radinger, 1st floor
  • 14.00 – 14.15 Opening Session
    lecture hall GM 2 Radinger, 1st floor
  • 14.15 – 15.35 Plenary Session I, 2 invited lectures
    lecture hall GM 2 Radinger, 1st floor
  • 15.35 – 16.00 Coffee break
    GM 8/9 Motorensymposium, 2nd floor
  • 16.00 – 18.00 Plenary Session II, 3 invited lectures
    lecture hall GM 2 Radinger, 1st floor
  • 18.00 – 20.00 Welcome party
    GM 8/9 Motorensymposium, 2nd floor

MHCL 2019 conference Day 2

Thursday - September 19th, 2019
  • 08.50 – 09.20 Late registration
    in front of lecture hall GM 2 Radinger, 1st floor
  • 09.20 – 10.30 Session A1, 4 papers
    lecture hall GM 2 Radinger, 1st floor
  • 10.30 – 11.00 Coffee break
    GM 8/9 Motorensymposium, 2nd floor
  • 11.00 – 13.00 Session B1 – Parallel Session, 7 papers
    lecture hall GM 4 Knoller, 2nd floor
  • 11.00 – 13.00 Session C1 – Parallel Session, 7 papers
    lecture hall GM 2 Radinger, 1st floor
  • 13.00 – 14.00 Lunch
    GM 8/9 Motorensymposium, 2nd floor
  • 14.00 – 16.00 Session B2 – Parallel Session, 7 papers
    lecture hall GM 2 Radinger, 1st floor
  • 14.00 – 16.00 Session C2 – Parallel Session, 7 papers
    lecture hall GM 4 Knoller, 2nd floor
  • 16.00 – 16.30 Coffee break
    GM 8/9 Motorensymposium, 2nd floor
  • 16.30 – 18.00 Session C3, 5 papers
    lecture hall GM 2 Radinger, 1st floor
  • 19.45 – 22.00 Dinner, restaurant “Augustinerkeller“

MHCL 2019 conference Day 3


Friday - September 20th, 2019
  • 09.20 – 10.50 Session A2, 5 papers
    lecture hall GM 2 Radinger, 1st floor
  • 10.50 – 11.20 Coffee break
    GM 8/9 Motorensymposium, 2nd floor
  • 11.20 – 13.00 Session A3, 6 papers
    lecture hall GM 2 Radinger, 1st floor
  • 13.00 – 14.00 Lunch
    GM 8/9 Motorensymposium, 2nd floor
  • 14.00 – 15.00 Guided laboratory tours
  • 15.00 – 15.30 Closing Session
    lecture hall GM 2 Radinger, 1st floor